Gyroid infill
Fixed a bug where Ultimaker Cura would upload the wrong firmware after switching printers in the UI. Fixed a bug where the layer view was missing if the first layer was empty. Fixed a bug where erroneous combing movements were taking place. Fixed a bug where the initial layer temperature is set correctly for the first object but then never again. Creality 3D, an official 3d printer supplier dedicated to developing 3d Printer & filament design, sales, and distributing, now we are looking for distributor & reseller cooperations, check more details here. Download the latest versions of ideaMaker, Quick Start Guide, RaiseTouch, Motion Control Board Firmware, Release Notes, Manuals, and Installation Guides.
New infill pattern with enhanced strength properties. Gyroid infill is one of the strongest infill types for a given weight, has isotropic properties, and prints relatively fast with reduced material use and a fully connected part interior. Note: Slicing time can increase up to 40 seconds or more, depending on the model. Contributed by smartavionics.
Support brim
New setting that integrates the first layer of support material with the brim's geometry. This significantly improves adhesion when printing with support material. Contributed by BagelOrb.
Cooling fan number
It is now possible to specify the cooling fan to use if your printer has multiple fans. This is implemented under Machine settings in the Extruder tab. Contributed by smartavionics.
Settings refactor
The CuraEngine has been refactored to create a more testable, future-proof way of storing and representing settings. This makes slicing faster, and future development easier.
Print core CC 0.6
The new print core CC 0.6 is selectable when the Ultimaker S5 profile is active. This print core is optimized for use with abrasive materials and composites.
File name and layer display
Added M117 commands to GCODE to give real-time information about the print job file name and layer number shown on the printer's display when printing via USB. Contributed by adecastilho.
Firmware checker/Ultimaker S5
The update checker code has been improved and tested for more reliable firmware update notifications in Ultimaker Cura. The Ultimaker S5 is now included.
Fullscreen mode shortcuts
Fullscreen mode can be toggled using the View menu or with the keyboard shortcuts: Command + Control + F (macOS), or F11 (Windows and Linux). Contributed by KangDroid.
Configuration error message
In previous versions, Ultimaker Cura would display an error dialog explaining when something happened to user configuration files, including the option to reset to factory defaults. This would not warn about losing the current printer and print profile settings, so this information has been added.
Rename Toolbox to Marketplace
The entry points to the Toolbox are now renamed to Marketplace. Bluestacks 3 pc download.
Materials in the Marketplace
A new tab has been added to the Marketplace that includes downloadable material profiles, to quickly and easily prepare models for a range of third-party materials.
New third-party definitions
New profiles added for Anycube 4MAx and Tizyx K25. Contributed by jscurtu and ValentinPitre respectively.
Improved definitions for Ender-3
The Ender-3 build plate size has been adjusted to the correct size of 235 x 235 mm, corrected the start-up sequence, and the printhead position has been adjusted when prints are purged or completed. Contributed by stelgenhof.
Add mesh names to slicing message
Added comment generation to indicate which mesh the GCODE after this comment is constructing. Contributed by paukstelis.
Bug fixes
- The active material is highlighted in Ultimaker Cura's material manager list. This behavior is now consistent with the profile and machine manager.
- The option to use 1.75 mm diameter filament with third-party 3D printers is now fixed and does not revert back to 2.85 mm. This fix also applies the appropriate a Z-axis speed change for 1.75 mm filament printers. Contributed by kaleidoscopeit.
- A fix was created to handle OSX version 10.10, but due to the Qt upgrade, users with older versions won't be able to run Ultimaker Cura on their system without a system update. This applies to OSX version 10.09 and 10.08.
- Fixed a memory leak when leaving the 'Monitor' page open.
- Added performance improvements to the PolygonConnector to efficiently connect polygons that are close to each other. This also reduces the chances of the print head collide with previously printed things. Contributed by BagelOrb.
- Fixed a bug where the GCODE reader didn't show retractions.
- Changes the USBPrinting update thread to prevent flooding the printer with M105 temperature update requests. Contributed by fieldOfView.
- Fix the behavior of the 'manage visible settings' button, when pressing the 'cog' icon of a particular category. Contributed by fieldOfView.
- Add a new post processing script that pauses the print at a certain height that works with RepRap printers. Contributed by Kriechi.
- Fix updates to the print monitor temperatures while preheating. Contributed by fieldOfView.
- Fixed a bug where material cost is not shown unless weight is changed.
- Fixed bugs crashing the CuraEngine when TreeSupport is enabled.
- Fixed a bug where Ultimaker Cura would upload the wrong firmware after switching printers in the UI.
- Fixed a bug where the layer view was missing if the first layer was empty.
- Fixed a bug where erroneous combing movements were taking place.
- Fixed a bug where the initial layer temperature is set correctly for the first object but then never again.
- Fixed a bug where clicking the fx icon didn't respond.
Bug fixes
- Fixed issues where Cura crashes on startup and loading profiles
- Updated translations
- Fixed an issue where the text would not render properly
Tree support
Experimental tree-like support structure that uses ‘branches' to support prints. Branches ‘grow' and multiply towards the model, with fewer contact points than alternative support methods. I view download. This results in better surface finishes for organic-shaped prints.
Adaptive layers
Prints with a variable layer thickness which adapts to the angle of the model's surfaces. The result is high-quality surface finishes with a marginally increased print time. This setting can be found under the experimental category.
Faster startup
Printer definitions are now loaded when adding a printer, instead of loading all available printers on startup.
Backface culling in layer view
https://geta-download.mystrikingly.com/blog/file-cabinet-pro-4-2-9. Doubled frame rate by only rendering visible surfaces of the model in the layer view, instead of rendering the entire model. Good for lower spec GPUs as it is less resource-intensive.
Multi build plate
Experimental feature that creates separate build plates with shared settings in a single session, eliminating the need to clear the build plate multiple times. Multiple build plates can be sliced and sent to a printer or printer group in Cura Connect. This feature must be enabled manually in the preferences ‘general' tab.
Improved mesh type selection
New button in the left toolbar to edit per model settings, giving the user more control over where to place support. Objects can be used as meshes, with a drop down list where ‘Print as support', ‘Don't overlap support with other models', ‘Modify settings for overlap with other models', or ‘Modify settings for infill of other models' can be specified. Data creator 1 7 16. Contributed by fieldOfView.
View optimization
Quick camera controls introduced in version 3.1 have been revised to create more accurate isometric, front, left, and right views.
Updated sidebar to QtQuick 2.0
Application framework updated to increase speed, achieve a better width and style fit, and gives users dropdown menus that are styled to fit the enabled Ultimaker Cura theme, instead of the operating system's theme.
Hide sidebar
The sidebar can now be hidden/shown by selecting View > Expand/Collapse Sidebar, or with the hotkey CMD + E (Mac) or CTRL + E (PC and Linux).
Disable ‘Send slice information'
Cura Download Deutsch Free
Hearthstone download size android. A shortcut to disable ‘Send slice information' has been added to the first launch to make it easier for privacy-conscious users to keep slice information private.
Signed binaries (Windows)
For security-conscious users, the Windows installer and Windows binaries have been digitally signed to prevent 'Unknown application' warnings and virus scanner false-positives.
Cura Download Deutsch Download
Start/end gcode script per extruder
Variables from both extruders in the start and end gcode snippets can now be accessed and edited, creating uniformity between profiles in different slicing environments. Contributed by fieldOfView.
OctoPrint plugin added to plugin browser
This plugin enables printers managed with OctoPrint to print via Ultimaker Cura interface (version 3.2 or later).
Bugfixes
- Fixed a bug where the mirror tool and center model options when used together would reset the model transformations
- Updated config file path to fix crashes caused by user config files that are located on remote drives
- Updated Arduino drivers to fix triggering errors during OTA updates in shared environments. This also fixes an issue when upgrading the firmware of the Ultimaker Original.
- Fixed an issue where arranging small models would fail, due to conflict with small model files combined with the 'Ensure models are kept apart' option
